Tejora Aritech reserves the right to change specifications without notice. The pulse count ismonitored after the first triggering in a window of 30s with 1s intervals. Connection details for CS The Outputs are fairly straight forward. Aritech Fire Alarm Manuals — Manual.
|Published (Last):||27 January 2016|
|PDF File Size:||11.21 Mb|
|ePub File Size:||6.12 Mb|
|Price:||Free* [*Free Regsitration Required]|
Tejora Aritech reserves the right to change specifications without notice. The pulse count ismonitored after the first triggering in a window of 30s with 1s intervals. Connection details for CS The Outputs are fairly straight forward. Aritech Fire Alarm Manuals — Manual. Alarm Input is only active when the system is armed and it will act according to its programmed attributes. Two types of attack can be calibrated for. Mn Function change codes, cd, date, read artech memory, access to chime function.
Spread the load of the bells across the bell outputs or fit a relay and use the auxiliary power output to provide some of the current. Option Operation No forced arming Forced arming is not possible. Resets with disarm or start of entry time. Alarm zone does not activate system.
Change of hour forward Check the zone wiring to ensure that the circuit is closed and that there are no shorts on the ariech. Wiring of Fire DetectorsFigure When the existing engineer code is unknown, then the control panel must be returned to the factory for reprogramming.
Trouble Indicates a system error: When only the zone attributes Ls is addedthen the panel will aritch a local alarm for inertia sensor activations and a full alarm when the raitech opens.
If after the exit time the zone is still open, the panel will not arm and act as programmed in function 6. The display shows the keypads connected, eg.
Unused Input is not operational. Restore the mains power. Control panel activates 1. Restart the programming of a name. Check that jumper is on link LK1 on the main control panel.
Enter the Default User Security Code  manuak the keypad to disarm the system. Fs Ps Us Pu Full set. See also Peridiax feature on page Check that the battery is connected correctly. Immediately after you enter the engineer code, keyin one of the digit sequences as indicated in the Short Code List.
Check that the internal sounder is connected. See manyal the chapter returning to factory default. Related Articles.
Aritech CS350 Installation Instructions Manual
Meztitaxe If after the exit time the zone is still open, the panel will not arm and act as programmed in function 6. Keyswitch arms panel without exit time. Fire Switches with a fire alarm. This proves that the panel is functioning correctly. Keypad Lock opening this input will disable access to the keypad.
Aritech CS350 Manuals
Confirm to reprogram current text. Bell fuse blows when bells are sounding. The exterior bell and Perimeter bell output types will reset after this time alarm expired. The display shows the keypads connected, eg. Alarm Switches with intrusion and tamper alarm Tamper only when armed.